Mateer 3900MLX Inline Automatic Filler

The Mateer 3900MLX filler accurately fills a wide variety of products, including free-flow powders and granules and non-free-flow powders, liquids, creams, pastes, and slurries.  This filling machine adds a conveyor belt for greater speed, combining it with the reliability of an electric clutch brake-controlled auger.  As with the 1900DMLX, the electric clutch brake is easy for your staff to diagnose, service and maintain.

Contact us today to speak with one of our Mateer experts about setting up a complimentary
product evaluation in our Fill Test Lab at our Clearwater, FL facility.

Brand

Market(s)

Brochure(s)

  • PSA modifies the standard Warner EM Clutch/Brake with our own housing and a heavier duty bearing to accept higher torque shaft loads
  • industry-standard PLC controls and Human-Machine Interface (HMI) enable operators to easily input, change and monitor filling parameters, maximizing speed and efficiency and keeping downtime to a minimum
  • The PLC and HMI controls are readily supportable by PSA's Customer Support team or local Maintenance, Repair and Operations (MRO) suppliers.  Programming is included in the installation of any Mateer filling machine.
  • Lifts for packing and bottom-up fill work in conjunction.  The container lift prevents blow up over the sides to minimize dust in filling.  Bottom-up fill eliminates spillage and voids when filling a product such as peanut butter or spackling compound.
  • Fully-integrated checkweigher with feedback and over/under weight reject ensures accuracy of every fill. 
  • Base cabinet is clad in food-grade stainless steel with raised conveyor for ease of cleanup
  • Adjustable guide rails with indexing package to feed round or non-round plastic, metal, glass, or composite containers make changing container sizes easy, and hold every size securely
  • Auger-height adjustment is outside of the product zone and can be accomplished in seconds without disrupting production.  This separation prevents workers from placing their hands inside the hopper, reducing the possibility of product contamination and increasing operator safety.
  • Tool-free product changeover can be done in as little as 10 minutes,* minimizing equipment down-time

* With a second set of change parts.
  • Speed: up to 20 CPM, depending on product, volume
  • Drive Unit Horsepower: 1.5 HP, variable speed auger, ¾ HP, 39 RPM heavy duty slow speed agitation
  • Motor: 230/380/460 volt, 3 phase, 50/60 hertz
  • Base Cabinet: 50” x 32” (1270 mm x 813 mm), type 304 stainless steel with lift off panels; 2” clearance between base and conveyor for easy cleaning
  • Conveyor: 8’ (2.44m) stainless steel conveyor channel with 1.13” wide table top chain conveyor and variable drive motor
  • Approximate Cube: 104” long x 48” wide x 96” high (285 cm x 122 cm x 245 cm)
  • Approximate Weight: 1,753 lbs (795 kg)
  • Documentation: Digital Documentation, including electrical drawing package, copy of PLC and (if applicable) HMI software, assembly drawings and bill of materials in English language.